Slewing Bearing Selection, Replacement & Custom Engineering
A slewing bearing must do more than fit the diameter. It must carry the real axial, radial and overturning loads, match the gear and mounting interfaces, survive the duty cycle and environment, and remain serviceable in the machine. FDON combines model cross-reference with application engineering so you can move from an old part number or new design requirement to a confirmed production drawing.
Start with what you know
Search an existing brand/model, or narrow the database by structure, gear and available catalog dimensions.
Choose the structure by engineering need — not by name alone
Each family solves a different combination of load, rigidity, space, precision and cost. Click “View Matching Models” to filter the live FDON database immediately.
Four-Point Contact Ball
Best for: General cranes, excavators, platforms, rotary equipment
Crossed Roller
Best for: Robots, machine tools, precision positioning, compact high-rigidity systems
Double-Row Ball
Best for: Medium-to-heavy combined loads and applications needing higher axial capacity
Three-Row Roller
Best for: Mining, port cranes, offshore, stacker-reclaimers and very heavy machinery
Flanged Single-Row Ball
Best for: Compact OEM machinery, light-to-medium duty equipment and cost-sensitive designs
Light / Agricultural
Best for: Agricultural attachments, conveyors, light rotary equipment and custom mechanisms
Six decisions before a slewing bearing becomes a safe specification
This follows the same practical idea used by established slewing-bearing engineering guides: first define the actual application, then loads and service conditions, then gear/mounting, then select and verify the bearing.
If the axis is unusual, radial load is high, speed is continuous, temperature is extreme, shock dominates, or the support structure is flexible, treat it as an engineering project rather than a catalog-only selection. Send the full duty case early.
Where the bearing fails is often where the application was misunderstood
Different industries stress the bearing differently. The first question is not “What diameter?” but “What does the machine ask the bearing to do?”
Construction Machinery
Excavators, cranes, concrete and earthmoving equipment
Port Machinery
Harbor cranes, bulk handling, stacker-reclaimers
Wind Power Equipment
Pitch, yaw and large rotary interfaces
Marine & Offshore
Deck cranes, offshore handling and rotary structures
Mining Machinery
Excavators, shovels, reclaimers, crushers
Aerial Work Platform
Boom lifts, turntables, access platforms
Water Treatment Equipment
Clarifiers, bridge scrapers, rotating mechanisms
Welding Equipment
Positioners, manipulators, rotary fixtures
Machine Tools & Automation
Robots, AGV, rotary tables, automation
Truck-mounted Crane
Loader cranes, boom trucks, mobile lifting
One visual, three questions
- Structure: which rolling-element arrangement fits the load and rigidity?
- Replacement: which original brand/model must be matched?
- Application: what duty, environment and certification drive the final design?
Tap or click the image to enlarge. The page below converts this overview into searchable engineering data.
What FDON needs to verify a selection
What makes a quote truly comparable
Cases should answer “what problem was solved?”
Large irregular CSM slewing bearing
Thin wall, deformation risk, 50Mn material and difficult installation interface. The engineering focus was manufacturing stability and a practical installation/reinforcement route.
Ask for a similar review →Old OEM bearing with incomplete data
When the original number is unavailable or obsolete, FDON works from model, photos, dimensions and gear/mounting interfaces, then issues a replacement drawing for confirmation.
Send old bearing data →Large load + gear interface verification
For port, mining and crane projects, bearing capacity alone is not enough. The gear, bolts, support structure, inspection and documentation must be treated as one system.
Review my load case →Matching Slewing Bearings
Search the number you already have
The current database includes references across established slewing-bearing brands. Brand names are used for identification and replacement comparison and do not imply OEM affiliation.
Selection is easier when the technical path is visible
Six questions customers usually need answered before ordering
1. How do I select the correct slewing bearing?
Start with axial load, radial load, overturning moment, duty cycle, shock load, speed, required accuracy, mounting dimensions, gear arrangement, environment and lubrication. A catalog model is only a preliminary selection until the real load cases and interfaces are verified.
2. Can FDON replace Rothe Erde, SKF/RKS, IMO, INA, Rollix or Kaydon bearings?
Yes, FDON can review an original model, drawing, dimensions or an old sample and prepare a replacement proposal. Because variants can share similar names, final interchangeability must be confirmed against the drawing, mounting holes, gear and required clearance/preload.
3. What information should I send for the fastest quotation?
Send the original model or drawing, quantity, application, delivery location and — if available — axial/radial/moment loads, speed, gear data, mounting dimensions and required certificates. If you only have photos or an old sample, send those first and FDON can identify the missing measurements.
4. Which bearing type should I use for high overturning moment or heavy shock?
Three-row roller, double-row ball and crossed-roller structures may be considered depending on the load combination, available space and rigidity requirement. Shock and extreme loads should be included explicitly rather than hidden inside a nominal working load.
5. Why are mounting flatness, bolts and gear mesh checked if the bearing capacity is already sufficient?
The bearing shares load with the supporting structure. Local deflection, poor mounting flatness, incorrect bolt preload or poor pinion mesh can create highly uneven internal load distribution and premature failure even when the nominal bearing rating looks adequate.
6. Can FDON make a non-standard bearing from my drawing or an obsolete sample?
Yes. FDON supports custom dimensions, special mounting-hole patterns, internal/external/no gear, materials, coatings, seals and drawing-based replacement engineering. Production should start only after the final interfaces and acceptance criteria are confirmed.
Send the model, drawing or load case you already have
You do not need a perfect specification to start. A model number, old bearing photo, equipment name, drawing or load table is enough for FDON to identify the next missing information.



